Generating Flashing Binaries Offline
sudo for the
following commands:- bootburn.py
- create_bsp_images.py
- flash_bsp_images.py
However, if you choose to use sudo for one, use it
consistently the others. Do not switch between
sudo/non-sudo usage.
Use the create_bsp_images.py script to generate flashing binaries
offline when the target is not connected to the host using create_bsp
tools. Flashing binaries are pre-processed binaries used by the
update_sample update tool.
The create_bsp tool create_bsp_images.py requires
bootburn_lib.py and bootburn helper files for execution. The script
uses default paths as in bootburn for the target. Depending on the configuration file,
it processes raw binaries for flashing; including adding and signing headers. The
create_bsp_images.py image invokes tools such as
nvimagegen, nvtegrabct_v2 internally, similar to
bootburn.py, to process binaries.
The create_bsp_images.py script is available at:
<top>/drive-foundation/tools/flashtools/bootburnPrerequisites
To enable bootburn tracing support, execute the command:
sudo apt-get install -f lockfile-progscreate_bsp_images.py Command Line Options
The table below shows the parameter list for create_bsp_images.py.
| Options | Description |
|---|---|
| -B <boot_device> | Specify the boot-device. Supported boot devices are qspi and emmc. Default is qspi. |
| -C | Selects debug binaries for boot loaders. |
| -D | Enables debug prints from flashing script. |
| -E | Specifies ECC-enabled binaries for Native Only |
| -M | Specifies development version firmware for non-production board. |
| -X | Value dumps into the GR memory carveout. |
| -Y | Specifies the dt-overlay odm-data parameter. |
| -b <board_name> |
Specifies the board name:
|
| -c | Selects a safety profile: SCE with safety firmware, or APE with camera. |
| -d <partition_name> <filename> |
Specifies a DTB file. The default file is defined in the BoardSetFilePathsAndDefaultValues function in bootburn_helper.sh. bpmp-fw-dtb and kernel-dtb may be specified simultaneously. Note: This option is not intended to specify kernel-dtb in Hypervisor. |
| -g | Generates binaries at the specified path. Does not flash. |
| -h | Provides help on options for the create_bsp_images tool. |
| -k |
Specifies the absolute path of the configuration file to be used. If used with Hypervisor, the configuration file must have been created from bind_partitions and be located in the hypervisor output directory.
|
|
-l (Lower case l) |
Creates Linux images. |
| -p <pkc_file> | Specifies RSA or ECDSA key file <pkc_file> for signing images. |
| -q | Creates QNX images. |
| --encryption_key | Takes as parameter the full file path and name. Secure boot encryption key. Can be used with bootburn.sh and create_bsp_images.sh. |
| --hsm <key_string> |
Can be used with bootburn.sh and create_bsp_images.sh. Tells Bootburn what keys will be used in HSM mode. Key String is Key + Encrypt Keys. Key is rsa|eddsa. Encrypt Keys are sbk or kek0. Examples: --hsm rsa --hsm rsa+sbk -- --hsm eddsa --hsm eddsa+sbk
--hsm sbk |
| -r |
Specifies the chip revision. Supported values are:
This option must be used with the -b option.
|
|
-s (Lower case s) |
Skips creating the file system. |
| --asymmetric | Used to generate images for chains in asymmetric mode. |
| --customer-data | Specified customer data such as skuinfo and others to be updated during flashing. |
| --chain [A|B|C] |
For use by DRIVE Update to generate update packages.
|
| encrypt | Used to encrypt binaries |
| init_persistent_partition |
If a partition has the attribute ispersistent=yes Then the partition has a initialization file created |
| merge_chains | This is an option to be used with asymmetric boot chains for manufacturing |