Usage mode #1

In this mode, tools similar to minicom are used to attach to each of the UART terminal.

$<top>/drive-foundation/tools/muxer/tcu_muxer/tcu_muxer -g 17 -b 16 -d /dev/ttyACM0/dev/pts/0 RCE
/dev/pts/1 FSI
/dev/pts/2 PSCFW
/dev/pts/3 DCE
/dev/pts/4 BPMP
/dev/pts/5 SCE
/dev/pts/6 SPE
/dev/pts/7 TZ
/dev/pts/8 CCPLEX: 0
/dev/pts/9 CCPLEX: 1
/dev/pts/10 CCPLEX: 2
/dev/pts/11 CCPLEX: 3
/dev/pts/12 CCPLEX: 4
/dev/pts/13 CCPLEX: 5
/dev/pts/14 CCPLEX: 6
/dev/pts/15 CCPLEX: 7
/dev/pts/16 CCPLEX: 8
/dev/pts/17 CCPLEX: 9
/dev/pts/18 CCPLEX: 10
/dev/pts/19 CCPLEX: 11
/dev/pts/20 CCPLEX: 12
/dev/pts/21 CCPLEX: 13
/dev/pts/22 CCPLEX: 14
/dev/pts/23 CCPLEX: 15
/dev/pts/24 CCPLEX: 16
################################# 001 ##
   /dev/pts/9 [Guest VM 0]
  /dev/pts/10 [Update service]
  /dev/pts/11 [sysmgr]
  /dev/pts/12 [bpmp_server_native]
  /dev/pts/13 [vsc_server_native_sdmmc]
  /dev/pts/14 [vsc_server_native_qspi]
  /dev/pts/15 [vsc_server_native_ufs]
  /dev/pts/16 [se_server_native]
  /dev/pts/17 [nvhost_server_native]
  /dev/pts/18 [audio_server_native]
  /dev/pts/19 [debug-server]
  /dev/pts/25 [Hypervisor]

CCPLEX: 0 corresponds to VM0, CCPLEX: 1 corresponds to VM1 and so on. CCPLEX:16 corresponds to Hypervisor as mentioned by -b switch.